ATMEGA649P-MUR Atmel, ATMEGA649P-MUR Datasheet - Page 312

• Manufacturer Part Number: ATMEGA649P-MUR
• Description: AVR, 64KB FLASH, 2KB EE, 4KB SRA
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA649P-MUR

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI, UART/USART, USI
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

27.2
8284A–AVR–10/10
Fuse Bits
Table 27-2.
Notes:
The ATmega169A/169PA/329A/329PA/3290A/3290PA/649A/649P/6490A/6490P has three
Fuse bytes.
they are mapped into the Fuse bytes. Note that the fuses are read as logical zero, “0”, if they are
programmed.
Table 27-3.
Notes:
–
–
–
–
BODLEVEL2
BODLEVEL1
BODLEVEL0
RSTDISBL
BLB1 Mode
ATmega169A/169PA/329A/329PA/649A/649P/3290A/3290PA/6490A/6490P
Extended Fuse Byte
1
2
3
4
1. Program the Fuse bits and Boot Lock bits before programming the LB1 and LB2.
2. “1” means unprogrammed, “0” means programmed
1. See
2. Port G, PG5 is input only. Pull-up is always on. See
Memory Lock Bits
(2)
Table 27-3 toTable 27-5
(1)
(1)
(1)
Lock Bit Protection Modes
Extended Fuse Byte
Table 28-17 on page 355
BLB12
1
1
0
0
7
6
5
4
2
2
1
0
Bit No
BLB11
1
0
0
1
Description
–
–
–
–
Brown-out Detector trigger level
Brown-out Detector trigger level
Brown-out Detector trigger level
External Reset Disable
Protection Type
No restrictions for SPM or LPM accessing the Boot Loader
section.
SPM is not allowed to write to the Boot Loader section.
SPM is not allowed to write to the Boot Loader section, and LPM
executing from the Application section is not allowed to read
from the Boot Loader section. If Interrupt Vectors are placed in
the Application section, interrupts are disabled while executing
from the Boot Loader section.
LPM executing from the Application section is not allowed to
read from the Boot Loader section. If Interrupt Vectors are
placed in the Application section, interrupts are disabled while
executing from the Boot Loader section.
describe briefly the functionality of all the fuses and how
for BODLEVEL Fuse decoding.
(1)(2)
(Continued)
”Alternate Functions of Port G” on page 85
Default Value
1
1
1
1
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
312