ATTINY26-16PU Atmel, ATTINY26-16PU Datasheet - Page 39

• Manufacturer Part Number: ATTINY26-16PU
• Description: IC AVR MCU 2K 16MHZ IND 20-DIP
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY26-16PU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: USI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 2KB (1K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ATTINY2x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: 2-Wire/ISP/SM-Bus/SPI/UART/USI
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 2
• Operating Supply Voltage: 4.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• Package: 20PDIP
• Device Core: AVR
• Family Name: ATtiny
• Maximum Speed: 16 MHz
• For Use With: ATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAGATAVRISP2 - PROGRAMMER AVR IN SYSTEMATSTK505 - ADAPTER KIT FOR 14PIN AVR MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Standby Mode
Table 19. Active Clock Domains and Wake-up Sources in the different Sleep Modes.
Notes:
1477K–AVR–08/10
Sleep Mode
Idle
ADC Noise
Reduction
Power-down
Standby
1. Only recommended with external crystal or resonator selected as clock source.
2. Only level interrupt INT0.
(1)
clk
CPU
Active Clock domains
clk
FLASH
If the wake-up condition disappears before the MCU wakes up and starts to execute, e.g., a low
level on INT0 is not held long enough, the interrupt causing the wake-up will not be executed.
When the SM1..0 bits are “11” and an External Crystal/Resonator clock option is selected, the
SLEEP instruction forces the MCU into the Standby mode. This mode is identical to Power-down
with the exception that the Oscillator is kept running. From Standby mode, the device wakes up
in only six clock cycles.
clk
X
IO
clk
X
X
ADC
Source Enabled
Oscillators
Main Clock
X
X
X
INT0, and Pin
Change
X
X
X
X
(2)
(2)
(2)
Condition
USI Start
X
X
X
X
Wake-up Sources
EEPROM
Ready
X
X
ADC
X
X
Other I/O
X
39