AT91SAM7S32B-MU Atmel, AT91SAM7S32B-MU Datasheet - Page 315

• Manufacturer Part Number: AT91SAM7S32B-MU
• Description: IC MCU ARM7 32KB FLASH 48-VQFN
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S32B-MU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-VQFN Exposed Pad, 48-HVQFN, 48-SQFN, 48-DHVQFN
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

30. Two Wire Interface (TWI) AT91SAM7S161/16
30.1
30.2
6175K–ATARM–30-Aug-10
Overview
List of Abbreviations
NOTE: This definition of the TWI does not pertain to AT91SAM7S512/256/128/65/32/321. For
AT91SAM7S512/256/128/65/32/321, see
The Atmel Two-wire Interface (TWI) interconnects components on a unique two-wire bus, made
up of one clock line and one data line with speeds of up to 400 Kbits per second, based on a
byte-oriented transfer format. It can be used with any Atmel Two-wire Interface bus Serial
EEPROM and I²C compatible device such as Real Time Clock (RTC), Dot Matrix/Graphic LCD
Controllers and Temperature Sensor, to name but a few. The TWI is programmable as a master
or a slave with sequential or single-byte access. Multiple master capability is supported. Arbitra-
tion of the bus is performed internally and puts the TWI in slave mode automatically if the bus
arbitration is lost.
A configurable baud rate generator permits the output data rate to be adapted to a wide range of
core clock frequencies.
Below,
a full I2C compatible device.
Table 30-1.
Note:
Table 30-2.
I2C Standard
Standard Mode Speed (100 KHz)
Fast Mode Speed (400 KHz)
7 or 10 bits Slave Addressing
START BYTE
Repeated Start (Sr) Condition
ACK and NACK Management
Slope control and input filtering (Fast mode)
Clock stretching
Abbreviation
TWI
A
NA
P
S
Sr
SADR
Table 30-1
1. START + b000000001 + Ack + Sr
(1)
Atmel TWI compatibility with i2C Standard
Abbreviations
lists the compatibility level of the Atmel Two-wire Interface in Master Mode and
Description
Two-wire Interface
Acknowledge
Non Acknowledge
Stop
Start
Repeated Start
Slave Address
AT91SAM7S Series Preliminary
Section 29.
Atmel TWI
Supported
Supported
Supported
Not Supported
Supported
Supported
Not Supported
Supported
315