101-1121 Rabbit Semiconductor, 101-1121 Datasheet - Page 8

• Manufacturer Part Number: 101-1121
• Description: KIT CAMERA INTERFACE APPLICATION
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r

Specifications of 101-1121

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Interface: 10/100 BaseT Ethernet
• Embedded: Yes, Other
• Utilized Ic / Part: RCM3365
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1119

1.1 RCM3365 and RCM3375 Features
• Small size: 1.85" x 2.73" x 0.86"
• Microprocessor: Rabbit 3000 running at 44.2 MHz
• 52 parallel 5 V tolerant I/O lines: 44 configurable for I/O, 4 fixed inputs, 4 fixed outputs
• Three additional digital inputs, two additional digital outputs
• External reset
• Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with
• Ten 8-bit timers (six cascadable) and one 10-bit timer with two match registers
• 512K flash memory, 512K program execution SRAM, 512K data SRAM
• Fixed and hot-swappable mass-storage flash-memory options, which may be used with
• Real-time clock
• Watchdog supervisor
• Provision for customer-supplied backup battery via connections on header J4
• 10-bit free-running PWM counter and four pulse-width registers
• Two-channel Input Capture (shared with parallel I/O ports) can be used to time input
• Two-channel Quadrature Decoder accepts inputs from external incremental encoder
• Five or six 3.3 V CMOS-compatible serial ports with a maximum asynchronous baud
• Supports 1.15 Mbps IrDA transceiver
• Supports Dynamic C RabbitSys, which supports
The RCM3900/RCM3910 and RCM3365/RCM3375 RabbitCore modules are similar to
the RCM3305/RCM3315 and RCM3309/RCM3319, but they use fixed NAND or remov-
able media for their mass-storage memories instead of the fixed serial flash options of the
RCM3305/RCM3315 and the RCM3309/RCM3319.
2
(47 mm x 69 mm x 22 mm)
parallel I/O lines), plus I/O read/write
the standardized directory structure supported by the Dynamic C FAT File System
module.
signals from various port pins
modules
rate of 5.525 Mbps. Three ports are configurable as a clocked serial port (SPI), and two
ports are configurable as SDLC/HDLC serial ports (shared with parallel I/O ports).
updates, and remote monitoring and control of a RabbitSys-enabled RCM3365
Ethernet access for remote application
RabbitCore RCM3365/RCM3375