101-1121 Rabbit Semiconductor, 101-1121 Datasheet - Page 139

• Manufacturer Part Number: 101-1121
• Description: KIT CAMERA INTERFACE APPLICATION
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r

Specifications of 101-1121

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Interface: 10/100 BaseT Ethernet
• Embedded: Yes, Other
• Utilized Ic / Part: RCM3365
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1119

D.1 Power Supplies
Power is supplied from the motherboard to which the RCM3365/RCM3375 is connected
via header J4. The RCM3365/RCM3375 require a regulated 3.15 V to 3.45 V DC power
source. An RCM3365/RCM3375 with no loading at the outputs operating at 44.2 MHz
typically draws 250 mA.
D.1.1 Battery Backup
The RCM3365/RCM3375 does not have a battery, but there is provision for a customer-
supplied battery to back up the data SRAM and keep the internal Rabbit 3000 real-time
clock running.
Header J4, shown in Figure D-1, allows access to the external battery. This header makes
it possible to connect an external 3 V power supply. This allows the SRAM and the inter-
nal Rabbit 3000 real-time clock to retain data with the RCM3365/RCM3375 powered
down.
User’s Manual
Appendix D provides information on the current requirements of
the RCM3365/RCM3375 modules, and includes some background
on the reset generator.
NOTE: A backup battery is highly recommended to back up the data SRAM when using
an RCM3365 with Dynamic C RabbitSys to keep RabbitSys from reverting to its
default settings in case of a power failure.
Figure D-1. External Battery Connections
A
PPENDIX
at Header J4
D. P
OWER
S
UPPLY
133