mpc5554mzp80r2 Freescale Semiconductor, Inc, mpc5554mzp80r2 Datasheet - Page 53

• Manufacturer Part Number: mpc5554mzp80r2
• Description: Mpc5554 High Performance Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

Freescale Semiconductor
Revision
Rev. 2.0
Rev. 2.0
Rev. 2.0
Rev. 2.0
Rev. 2.0
Table 14
pre-program and erase times and used the previous values for Typical and Initial Max values.
Table 16
128 MHz system clock with 2% frequency modulation’
to: ‘132 MHz parts allow for 128 MHz system clock + 2% FM.’
Table 27
duty cycle is not 50% when . . . .
Table 12
Table
‘VDDE = 3.0 to 3.6 volts’ maximum value in column 4 from 9 to 10. Now reads
‘VDDE = 3.0–3.6 V’ with a max value of 10.
Table 2
differential voltage and the name of the Table, DC Electrical Specifications, to which the Spec
was moved.
Table 4
Refer to
Table 5
Figure 3
Table 9
Table 12
Table 14
Spec 8, 128KB block pre-program and erase time, Max column value from 15,000 to 7,500.
Table 15
Spec 1b, Min. column value changed from 10,000 to 1,000.
Table 21
Spec 12: Changed value in Max column from 9 to 10 for the VDDE = 3.0–3.6 V row.
• Typical Values —
• Initial Max Values —
• Changed Spec 21, column 2:
• Changed Spec 22: from ‘maximum frequency for the predivider’ to ‘20 MHz’.
• Corrected footnote 3 to read: If standby operation is not required, connect the V
• Changed Spec 26: Changed ‘AN[12]_MA[1]_SDO’ to ‘AN[13]_MA[1]_SDO’.
• Added to the beginning of footnote 1 ‘Nominal crystal and external references values are at
• Changed Spec 22, column 4, Max Value from f
16 KB: from 325 to 265
48 KB: from 435 to 340
64 KB: from 525 to 400
128 KB: from 675 to 500
16 KB: from 525 to 400
48 KB: from 525 to 400
64 KB: from 675 to 500
128 KB: from 1800 to 1250
substituted f
substituted f
f
f
ground.
worst-case not more than 1%’.
‘Maximum value for Dual Controller (1:1) mode is (f
(FMPLL_SYNCR[PREDIV] = 0b001).’
ico
ico
21, Nexus Debug Port Timing. Changed Spec 12, TCK Low to TDO Data Valid,
= [ f
= [ f
Absolute Maximum Ratings: Added the name of the Spec 21, V
EMI Testing Specifications, Spec 2: Added in the Max column a footnote that reads:
ESD Characteristics: Added (Electromagnetic Static Discharge) in the table title.
DC Electrical Specifications:
Table 1
FLASH BIU Settings vs. Frequency of Operations: Changed footnote 6 from: ‘Allows for
I
Flash Program and Erase Specifications: Inserted new values for the H7Fa Flash
EQADC SSI Timing Characteristics: Footnote 2: added ‘cycle’ after ‘duty’ to read: FCK
FMPLL Electrical Specifications:
FMPLL Electrical Specifications:
Flash Program and Erase Specifications:
Flash EEPROM Module Life (Full Temperature Change):
Nexus Debug Port Timing,
STBY
ref_crystal
ref_ext
Worst-case Specifications: Replaced the I
ref_crystal
ref_ext
× (MFD + 4) ] ÷ (PREDIV + 1)
for the maximum operating frequency.
× (MFD + 4) ] ÷ (PREDIV + 1)
Table 28. MPC5554 Revision History (continued)
MPC5554 Microcontroller Data Sheet, Rev. 2.0
for f
for f
ref
ref
for the external reference clock, giving:
in ICO frequency equation, and added the same equation but
Substantive Change(s)
MAX
MAX
to 20, and added footnote 20 to read,
STBY
÷ 2) with the predivider set to 1
Revision History for the MPC5554 Data Sheet
graph.
RC33
to V
DDSYN
STBY
to
3/19/07
3/26/07
4/25/07
4/27/07
5/3/07
Date
53