s908ab32ag0cfue Freescale Semiconductor, Inc, s908ab32ag0cfue Datasheet - Page 67

• Manufacturer Part Number: s908ab32ag0cfue
• Description: M68hc08 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

4.9 Wait Mode
4.10 Stop Mode
MC68HC908AB32
Freescale Semiconductor
NOTE:
—
Rev. 1.1
Putting the MCU into wait mode while the FLASH is in read mode does
not affect the operation of the FLASH memory directly, but there will not
be any memory activity since the CPU is inactive.
The WAIT instruction should not be executed while performing a
program or erase operation on the FLASH, otherwise the operation will
discontinue, and the FLASH will be on Standby Mode.
Putting the MCU into stop mode while the FLASH is in read mode does
not affect the operation of the FLASH memory directly, but there will not
be any memory activity since the CPU is inactive.
The STOP instruction should not be executed while performing a
program or erase operation on the FLASH, otherwise the operation will
discontinue, and the FLASH will be on Standby Mode
Standby Mode is the power saving mode of the FLASH module in which
all internal control signals to the FLASH are inactive and the current
consumption of the FLASH is at a minimum.
Examples of protect start address:
and so on...
Note:
The end address of the protected range is always $FFFF.
$FE (1111 1110)
$01 (0000 0001)
$02 (0000 0010)
BPR[7:0]
$FF
$00
FLASH Memory
The entire FLASH memory is not protected.
The entire FLASH memory is protected.
Start of Address of Protect Range
$FF00 (1111 1111 0000 0000)
$8080 (1000 0000 1000 0000)
$8100 (1000 0001 0000 0000)
FLASH Memory
Technical Data
67