ENC28J60-I/SO Microchip Technology, ENC28J60-I/SO Datasheet - Page 43

• Manufacturer Part Number: ENC28J60-I/SO
• Description: IC ETHERNET CTRLR W/SPI 28SOIC
• Manufacturer: Microchip Technology

Specifications of ENC28J60-I/SO

• Package / Case: 28-SOIC (7.5mm Width)
• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: SPI
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 160mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Input Voltage Range (max): 5.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3.1 V to 3.6 V
• Supply Current (max): 180 mA
• Data Rate: 10Mbps
• No. Of Ports: 1
• Ethernet Type: IEEE 802.3
• Interface Type: SPI
• Supply Current: 180mA
• Supply Voltage Range: 3.1V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Product: Ethernet Controllers
• Standard Supported: IEEE 802.3
• Ethernet Connection Type: 10Base-T
• Digital Ic Case Style: SOIC
• No. Of Pins: 28
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM163024 - BOARD DEMO PICDEM.NET 2AC164123 - BOARD DAUGHTER ETH PICTAIL PLUSAC164121 - BOARD DAUGHTER PICTAIL ETHERNET
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TABLE 7-1:
© 2006 Microchip Technology Inc.
55-52
47-32
19-16
15-0
Bit
51
50
49
48
31
30
29
28
27
26
25
24
23
22
21
20
Zero
Transmit VLAN Tagged Frame
Backpressure Applied
Transmit Pause Control Frame
Transmit Control Frame
Total Bytes Transmitted on Wire
Transmit Underrun
Transmit Giant
Transmit Late Collision
Transmit Excessive Collision
Transmit Excessive Defer
Transmit Packet Defer
Transmit Broadcast
Transmit Multicast
Transmit Done
Transmit Length Out of Range
Transmit Length Check Error
Transmit CRC Error
Transmit Collision Count
Transmit Byte Count
TRANSMIT STATUS VECTORS
Field
0
Frame’s length/type field contained 8100h which is the VLAN protocol
identifier.
Carrier sense method backpressure was previously applied.
The frame transmitted was a control frame with a valid pause opcode.
The frame transmitted was a control frame.
Total bytes transmitted on the wire for the current packet, including all
bytes from collided attempts.
Reserved. This bit will always be ‘0’.
Byte count for frame was greater than MAMXFL.
Collision occurred beyond the collision window (MACLCON2).
Packet was aborted after the number of collisions exceeded the
retransmission maximum (MACLCON1).
Packet was deferred in excess of 24,287 bit times (2.4287ms).
Packet was deferred for at least one attempt but less than an excessive
defer.
Packet’s destination address was a broadcast address.
Packet’s destination address was a multicast address.
Transmission of the packet was completed.
Indicates that frame type/length field was larger than 1500 bytes (type
field).
Indicates that frame length field value in the packet does not match the
actual data byte length and is not a type field. MACON3.FRMLNEN
must be set to get this error.
The attached CRC in the packet did not match the internally generated
CRC.
Number of collisions the current packet incurred during transmission
attempts. It applies to successfully transmitted packets and as such, will
not show the possible maximum count of 16 collisions.
Total bytes in frame not counting collided bytes.
Preliminary
Description
ENC28J60
DS39662B-page 41