ADC08D500CIYB/NOPB National Semiconductor, ADC08D500CIYB/NOPB Datasheet - Page 14

• Manufacturer Part Number: ADC08D500CIYB/NOPB
• Description: IC ADC 8BIT 500MSPS DUAL 128LQFP
• Manufacturer: National Semiconductor
• Series: PowerWise®r

Specifications of ADC08D500CIYB/NOPB

• Number Of Bits: 8
• Sampling Rate (per Second): 500M
• Data Interface: Serial
• Number Of Converters: 2
• Power Dissipation (max): 1.78W
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 128-LQFP Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *ADC08D500CIYB; *ADC08D500CIYB/NOPB; ADC08D500CIYB

www.national.com
Specification Definitions
rms value of the sum of all other spectral components below
one-half the sampling frequency, not including harmonics or
d.c.
SIGNAL TO NOISE PLUS DISTORTION (S/(N+D) or SI-
NAD) is the ratio, expressed in dB, of the rms value of the
input signal at the output to the rms value of all of the other
spectral components below half the clock frequency, includ-
ing harmonics but excluding d.c.
SPURIOUS-FREE DYNAMIC RANGE (SFDR) is the differ-
ence, expressed in dB, between the rms values of the input
signal at the output and the peak spurious signal, where a
spurious signal is any signal present in the output spectrum
that is not present at the input, excluding d.c.
TOTAL HARMONIC DISTORTION (THD) is the ratio ex-
pressed in dB, of the rms total of the first nine harmonic
levels at the output to the level of the fundamental at the
output. THD is calculated as
Transfer Characteristic
FIGURE 2. Input / Output Transfer Characteristic
(Continued)
14
where A
frequency and A
first 9 harmonic frequencies in the output spectrum.
– Second Harmonic Distortion (2nd Harm) is the differ-
ence, expressed in dB, between the RMS power in the input
frequency seen at the output and the power in its 2nd
harmonic level at the output.
– Third Harmonic Distortion (3rd Harm) is the difference
expressed in dB between the RMS power in the input fre-
quency seen at the output and the power in its 3rd harmonic
level at the output.
f1
is the RMS power of the fundamental (output)
f2
through A
f10
are the RMS power of the
20121422