S71PL064JB0BFW0B0 Spansion Inc., S71PL064JB0BFW0B0 Datasheet - Page 58

• Manufacturer Part Number: S71PL064JB0BFW0B0
• Manufacturer: Spansion Inc.

Specifications of S71PL064JB0BFW0B0

• Operating Supply Voltage (max): 3.1V
• Operating Temperature (max): 85C
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

59
SecSi Sector Factory-locked Indicator Bit (DQ7) is permanently set to a “1”. Op-
tional Spansion programming services can program the factory-locked area with
a random ESN, a customer-defined code, or any combination of the two. Because
only FASL can program and protect the factory-locked area, this method ensures
the security of the ESN once the product is shipped to the field. Contact your local
sales office for details on using Spansion’s programming services. Note that the
ACC function and unlock bypass modes are not available when the SecSi sector
is enabled.
Customer-Lockable Area (64 words)
The customer-lockable area of the SecSi Sector (000040h-00007Fh) is shipped
unprotected, which allows the customer to program and optionally lock the area
as appropriate for the application. The SecSi Sector Customer-locked Indicator
Bit (DQ6) is shipped as “0” and can be permanently locked to “1” by issuing the
SecSi Protection Bit Program Command. The SecSi Sector can be read any num-
ber of times, but can be programmed and locked only once. Note that the
accelerated programming (ACC) and unlock bypass functions are not available
when programming the SecSi Sector.
The Customer-lockable SecSi Sector area can be protected using one of the
following procedures:
Once the SecSi Sector is locked and verified, the system must write the Exit SecSi
Sector Region command sequence to return to reading and writing the remainder
of the array.
The SecSi Sector lock must be used with caution since, once locked, there is no
procedure available for unlocking the SecSi Sector area and none of the bits in
the SecSi Sector memory space can be modified in any way.
SecSi Sector Protection Bits
The SecSi Sector Protection Bits prevent programming of the SecSi Sector mem-
ory area. Once set, the SecSi Sector memory area contents are non-modifiable.
Write the three-cycle Enter SecSi Sector Region command sequence, and
then follow the in-system sector protect algorithm as shown in
cept that RESET# may be at either V
tion of the SecSi Sector Region without raising any device pin to a high
voltage. Note that this method is only applicable to the SecSi Sector.
To verify the protect/unprotect status of the SecSi Sector, follow the algo-
rithm shown in
Figure
S29PL127J/S29PL064J/S29PL032J for MCP
3.
P r e l i m i n a r y
IH
or V
ID
. This allows in-system protec-
Figure
S29PL127_064_032J_00_A1 May 21, 2004
1, ex-