MAX1441GUP/V+ Maxim Integrated Products, MAX1441GUP/V+ Datasheet - Page 17

• Manufacturer Part Number: MAX1441GUP/V+
• Description: Touch Screen Converters & Controllers PROXIMITY SENSR el Proximity and Tou
• Manufacturer: Maxim Integrated Products

Specifications of MAX1441GUP/V+

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 5. Special-Purpose Register Bit Description (continued)
WDCN[5:4]–WD[1:0]
WDCN.6–EWDI
WDCN.7–POR
A0 (00h, 09h)
Initialization
Read/Write Access
A0[15:0]
A1 (01h, 09h)
Initialization
Read/Write Access
A1[15:0]
A2 (02h, 09h)
Initialization
Read/Write Access
A2[15:0]
A3 (03h, 09h)
Initialization
Read/Write Access
A3[15:0]
REGISTER
Automotive, Two-Channel Proximity and
Watchdog Timer Mode Select Bits [1:0]. These bits are used to provide a user selection of watchdog
timer interrupt periods, which determine the watchdog timer interrupt timeout when the watchdog timer
is enabled. All watchdog timer reset timeouts follow the programmed interrupt timeouts by 512 times the
clock divide ratio oscillator cycles.
Mode select bit settings and the timeout values. Changing the WD1:0 bit settings resets the watchdog
timer unless the 512 clock reset counter has already started, in which case, changing the WD1:0 bits
does not affect the watchdog timer or reset counter.
These bits can only be written when simultaneously resetting the timer (RWT = 1). Otherwise, a
write to these control bits is ignored (i.e., user software sets the RWT bit and changes the WD
value in the same instruction).
Watchdog Interrupt Enable. Setting this bit to 1 enables interrupt requests generated by the watchdog
timer. Clearing this bit to 0 disables the interrupt requests. This bit is cleared following a power-on reset
and unaffected by all other resets.
Power-On Reset Flag. This bit indicates whether the last reset was a power-on reset. This bit is typically
interrogated following a reset. It must be cleared before the next reset of any kind for software to work
correctly. This bit is set following a power-on reset and unaffected by all other resets.
Accumulator 0 (16-Bit Register)
This register is cleared to 0000h on all forms of reset.
Unrestricted read/write.
Accumulator 0 Bits [15:0]. This register serves as the accumulator for arithmetic and logical operation
when activated by the accumulator pointer. Otherwise, it can be used as general-purpose working
register.
Accumulator 1 (16-Bit Register)
This register is cleared to 0000h on all forms of reset.
Unrestricted read/write.
Accumulator 1 Bits [15:0]. This register serves as the accumulator for arithmetic and logical operation
when activated by the accumulator pointer. Otherwise, it can be used as a general-purpose working
register.
Accumulator 2 (16-Bit Register)
This register is cleared to 0000h on all forms of reset.
Unrestricted read/write.
Accumulator 2 Bits [15:0]. This register serves as the accumulator for arithmetic and logical operation
when activated by the accumulator pointer. Otherwise, it can be used as a general-purpose working
register.
Accumulator 3 (16-Bit Register)
This register is cleared to 0000h on all forms of reset.
Unrestricted read/write.
Accumulator 3 Bits [15:0]. This register serves as the accumulator for arithmetic and logical operation
when activated by the accumulator pointer. Otherwise, it can be used as a general-purpose working
register.
DESCRIPTION
Touch Sensor
17