ATMEGA32A-MNR Atmel, ATMEGA32A-MNR Datasheet - Page 16

• Manufacturer Part Number: ATMEGA32A-MNR
• Description: IC MCU AVR 32K 16MHZ 44VQFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA32A-MNR

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-VFQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7. AVR Memories
7.1
7.2
8155C–AVR–02/11
Overview
In-System Reprogrammable Flash Program Memory
This section describes the different memories in the ATmega32A. The AVR architecture has two
main memory spaces, the Data Memory and the Program Memory space. In addition, the
ATmega32A features an EEPROM Memory for data storage. All three memory spaces are linear
and regular.
The ATmega32A contains 32Kbytes On-chip In-System Reprogrammable Flash memory for
program storage. Since all AVR instructions are 16 bits or 32 bits wide, the Flash is organized as
16K × 16. For software security, the Flash Program memory space is divided into two sections,
Boot Program section and Application Program section.
The Flash memory has an endurance of at least 10,000 write/erase cycles. The ATmega32A
Program Counter (PC) is 14 bits wide, thus addressing the 16K program memory locations. The
operation of Boot Program section and associated Boot Lock bits for software protection are
described in detail in
253.
ming in SPI, JTAG, or Parallell Programming mode.
Constant tables can be allocated within the entire program memory address space (see the LPM
– Load Program Memory Instruction Description).
Timing diagrams for instruction fetch and execution are presented in
ing” on page
“Memory Programming” on page 267
12.
“Boot Loader Support – Read-While-Write Self-Programming” on page
contains a detailed description on Flash Program-
“Instruction Execution Tim-
ATmega32A
16