PIC32MX575F512H-80I/PT Microchip Technology, PIC32MX575F512H-80I/PT Datasheet - Page 3

• Manufacturer Part Number: PIC32MX575F512H-80I/PT
• Description: IC MCU 32BIT 512KB FLASH 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX575F512H-80I/PT

• Core Size: 32-Bit
• Program Memory Size: 512KB (512K x 8)
• Core Processor: MIPS32® M4K™
• Speed: 80MHz
• Connectivity: CAN, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC32
• No. Of I/o's: 53
• Ram Memory Size: 64KB
• Cpu Speed: 80MHz
• No. Of Timers: 5
• Digital Ic Case Style: TQFP
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

High-Performance 32-bit RISC CPU:
• MIPS32
• 80 MHz maximum frequency
• 1.56 DMIPS/MHz (Dhrystone 2.1) performance
• Single-cycle multiply and high-performance divide
• MIPS16e™ mode for up to 40% smaller code size
• Two sets of 32 core register files (32-bit) to reduce
• Prefetch Cache module to speed execution from
Microcontroller Features:
• Operating voltage range of 2.3V to 3.6V
• 256K to 512K Flash memory (plus an additional
• 64K to 128K SRAM memory
• Pin-compatible with most PIC24/dsPIC
• Multiple power management modes
• Multiple interrupt vectors with individually
• Fail-Safe Clock Monitor mode
• Configurable Watchdog Timer with on-chip
Peripheral Features:
• Atomic Set, Clear, and Invert operation on select
• 8-channel hardware DMA with automatic data
• USB 2.0-compliant full-speed device and On-The-
• 10/100 Mbps Ethernet MAC with MII and RMII
• CAN module:
• 3 MHz to 25 MHz crystal oscillator
 2009 Microchip Technology Inc.
at zero wait state Flash access
unit
interrupt latency
Flash
12 KB of Boot Flash)
programmable priority
Low-Power RC oscillator for reliable operation
peripheral registers
size detection
Go (OTG) controller:
- Dedicated DMA channels
interface:
- Dedicated DMA channels
- 2.0B Active with DeviceNet™ addressing
- Dedicated DMA channels
support
®
M4K™ 32-bit core with 5-stage pipeline
High-Performance USB, CAN, and Ethernet
32-bit Flash Microcontrollers
PIC32MX5XX/6XX/7XX
®
devices
Preliminary
Peripheral Features (Continued):
• Internal 8 MHz and 32 kHz oscillators
• Six UART modules with:
• Up to four SPI modules
• Up to five I
• Separate PLLs for CPU and USB clocks
• Parallel master and slave port (PMP/PSP) with
• Hardware Real-Time Clock/Calendar (RTCC)
• Five 16-bit Timers/Counters (two 16-bit pairs
• Five Capture inputs
• Five Compare/PWM outputs
• Five external interrupt pins
• High-speed I/O pins capable of toggling at up to
• High-current sink/source (18 mA/18 mA) on
• Configurable open-drain output on digital I/O pins
Debug Features:
• Two programming and debugging Interfaces:
• Unintrusive hardware-based instruction trace
• IEEE Standard 1149.2-compatible (JTAG)
Analog Features:
• Up to 16-channel 10-bit Analog-to-Digital
• Two Analog Comparators
• 5V tolerant input pins (digital pins only)
- RS-232, RS-485 and LIN 1.2 support
- IrDA
8-bit and 16-bit data and up to 16 address lines
combine to create two 32-bit timers)
80 MHz
all I/O pins
- 2-wire interface with unintrusive access and
- 4-wire MIPS
boundary scan
Converter:
- 1 Msps conversion rate
- Conversion available during Sleep and Idle
decoder
real-time data exchange with application
interface
®
with on-chip hardware encoder and
2
C™ modules
®
standard enhanced JTAG
DS61156B-page 3