PIC16F873-04I/SO Microchip Technology, PIC16F873-04I/SO Datasheet - Page 475

• Manufacturer Part Number: PIC16F873-04I/SO
• Description: IC MCU FLASH 4KX14 EE 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F873-04I/SO

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC16F
• No. Of I/o's: 22
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 192Byte
• Cpu Speed: 4MHz
• No. Of Timers: 3
• Package: 28SOIC W
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 4 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 22
• Interface Type: I2C/SPI/USART
• On-chip Adc: 5-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28SO-1 - SOCKET TRANSITION 28SOIC 300MIL309-1073 - ADAPTER 28-SOIC TO 28-SOIC309-1024 - ADAPTER 28-SOIC TO 28-DIP309-1023 - ADAPTER 28-SOIC TO 28-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

25.8
25.9
1997 Microchip Technology Inc.
Effects of a Reset
Configuring the LCD Module
The LCD module is disabled, but the LCD pins are configured as LCD drivers. This ensures that
the microcontroller does not damage the LCD glass by accidently having a DC voltage across a
segment.
The following is the sequence of steps to follow to configure the LCD module.
1.
2.
3.
4.
5.
6.
- Multiplex mode and Bias, selected by the LMUX1:LMUX0 bits
- Timing source, selected by the CS1:CS0 bits
- Voltage generation, enabled by the VGEN bit
- Sleep mode operation, enabled by the SLPEN bit
Select the frame clock prescale using the LP3:LP0 bits (LCDPS<3:0>).
Configure the appropriate pins to function as segment drivers using the LCDSE register.
Configure the LCD module for the following using the LCDCON register.
Write initial values to pixel data registers, LCDD00 through LCDD15.
Clear LCD interrupt flag bit, LCDIF, and if desired, enable the interrupt by setting the
LCDIE bit.
Enable the LCD module, by setting the LCDEN bit (LCDCON<7>).
Section 25. LCD
DS31025A-page 25-17
25