PIC16F873-04I/SO Microchip Technology, PIC16F873-04I/SO Datasheet - Page 327

• Manufacturer Part Number: PIC16F873-04I/SO
• Description: IC MCU FLASH 4KX14 EE 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F873-04I/SO

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC16F
• No. Of I/o's: 22
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 192Byte
• Cpu Speed: 4MHz
• No. Of Timers: 3
• Package: 28SOIC W
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 4 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 22
• Interface Type: I2C/SPI/USART
• On-chip Adc: 5-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28SO-1 - SOCKET TRANSITION 28SOIC 300MIL309-1073 - ADAPTER 28-SOIC TO 28-SOIC309-1024 - ADAPTER 28-SOIC TO 28-DIP309-1023 - ADAPTER 28-SOIC TO 28-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Figure 17-35: Bus Collision During Start Condition (SDA only)
Figure 17-36: Bus Collision During Start Condition (SCL = 0)
1997 Microchip Technology Inc.
SDA
SCL
SEN
S
BCLIF
SSPIF
SDA
SCL
SEN
S
BCLIF
SSPIF
'0'
'0'
SCL = 0 before BRG time out,
Bus collision occurs, Set BCLIF.
Set SEN, enable start
sequence if SDA = 1, SCL = 1
condition if SDA = 1, SCL=1
Set SEN, enable start
SDA sampled low before
START condition.
S bit and SSPIF set because
SDA = 0, SCL = 1
. Set BCLIF,
SDA goes low before the SEN bit is set.
S bit and SSPIF set because
SDA = 0, SCL = 1
SDA = 0, SCL = 1
Set BCLIF.
T
BRG
Preliminary
T
BRG
SSPIF and BCLIF are
cleared in software.
SEN cleared automatically because of bus collision.
SSP module reset into idle state.
SCL = 0 before SDA = 0,
Bus collision occurs, Set BCLIF.
Section 17. MSSP
SSPIF and BCLIF are
cleared in software.
Interrupts cleared
in software.
'0'
'0'
DS31017A-page 17-51
17