PIC16F873-04I/SO Microchip Technology, PIC16F873-04I/SO Datasheet - Page 35

• Manufacturer Part Number: PIC16F873-04I/SO
• Description: IC MCU FLASH 4KX14 EE 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F873-04I/SO

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC16F
• No. Of I/o's: 22
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 192Byte
• Cpu Speed: 4MHz
• No. Of Timers: 3
• Package: 28SOIC W
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 4 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 22
• Interface Type: I2C/SPI/USART
• On-chip Adc: 5-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28SO-1 - SOCKET TRANSITION 28SOIC 300MIL309-1073 - ADAPTER 28-SOIC TO 28-SOIC309-1024 - ADAPTER 28-SOIC TO 28-DIP309-1023 - ADAPTER 28-SOIC TO 28-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

2.3.1
1997 Microchip Technology Inc.
Oscillator / Resonator Start-up
As the device voltage increases from V
required for the oscillator to start oscillating depends on many factors. These include:
• Crystal / resonator frequency
• Capacitor values used (C1 and C2 in
• Device V
• System temperature
• Series resistor value (and type) if used (Rs in
• Oscillator mode selection of device (which selects the gain of the internal oscillator inverter)
• Crystal quality
• Oscillator circuit layout
• System noise
Figure 2-2
oscillator waveform can be quite low (less than 50% of device V
tered at V
Figure 2-2: Example Oscillator / Resonator Start-up Characteristics
DD
DD
graphs an example oscillator / resonator start-up. The peak-to-peak voltage of the
Maximum V
/2 (refer to
rise time
DD
parameters D033
of System
Voltage
0V
Crystal Start-up Time
Figure
and
Section 2. Oscillator
SS
Device V
, the oscillator will start its oscillations. The time
D043
2-1)
Figure
in the
DD
2-1)
“Electrical Specifications”
Time
DD
) where the waveform is cen-
DS31002A-page 2-5
section).
2