FS2003-UPG7 Equinox Technologies, FS2003-UPG7 Datasheet - Page 55

• Manufacturer Part Number: FS2003-UPG7
• Description: UPGRADE FS2003 JTAG ISP AVR MCU
• Manufacturer: Equinox Technologies
• Type: Upgrade Kitr

Specifications of FS2003-UPG7

• Mfg Application Notes: SPI and JTAG (ISP), Appl Note
• For Use With/related Products: FS2003
• Other names: 483-1009

7. Programming Project – FAIL
If the Programming Project fails for some reason:
LCD Display
8. Locking the Programmer Keypad
It is possible to lock the programmer keypad so that the <Up> and <Down> keys no longer work in
Standalone Mode. This will stop a user being able to select any other project stored in the
programmer once the initial project has been selected.
To lock the Programmer Keypad:
Please note:
This feature is only available in firmware 3.01 or above.
52
•
•
•
•
•
•
•
•
•
•
•
The <FAIL> LED will FLASH
The programmer will automatically remove power from the Target System (if the programmer
is controlling power)
The LCD will display the relevant Error Message.
The List of possible Error Message can be found in the ‘Error Messages’ section of this
manual.
Press the <NO> button to clear the Error Message
Press <YES> key to program another device. The programmer then goes back to step 3.
Open your Programming Project in Project Builder or EDS
Select the <Programmer and Project Type> tab
Check the ‘Lock Keypad’ box
Re-compile the project
Upload the project to the programmer
MESSAGE
ERROR
Buttons
Press
to clear the error
message.
FS2003 ISP Programmer - User Guide V1.08 – 1
Status LED
Display
st
August 2008