FS2003-UPG7 Equinox Technologies, FS2003-UPG7 Datasheet - Page 32

• Manufacturer Part Number: FS2003-UPG7
• Description: UPGRADE FS2003 JTAG ISP AVR MCU
• Manufacturer: Equinox Technologies
• Type: Upgrade Kitr

Specifications of FS2003-UPG7

• Mfg Application Notes: SPI and JTAG (ISP), Appl Note
• For Use With/related Products: FS2003
• Other names: 483-1009

2.6 Connecting the programmer to the PC Serial (COM) Port
The programmer communicates with a PC via the RS-232 Communications Port (J5).
The programmer is supplied with the following PC Serial Cables / Adaptors:
2.6.1 9-way PC Serial Port Connection
The 9-way serial cable should be connected between the 9-way D-connector on the programmer and
a spare 9-way RS-232 COM port on your PC.
2.6.2 25-way PC Serial Port Connection
If your PC has a 25-way D connector, you will need to plug the 9-25 way adaptor onto the end of the
9-9 way Serial Cable as shown in the diagram below.
If your PC does not have a COM port, it will be necessary to use a ‘USB to RS232 Convertor Cable’.
You can purchase a suitable cable from most PC retailers. Equinox can also supply a suitable cable.
Important note:
The programmer uses ALL of the NINE pins of the COM port for different purposes. It is therefore
imperative that the cable used to connect between the programmer and the PC COM port has all
NINE cables connected. Failure to do this will result in the programmer not operating correctly.
FS2003 ISP Programmer - User Guide V1.08 – 1
2.6.3 USB Connection
•
•
9-way D (Female) to 9-way D (Male) Serial Cable
9-way to 25-way Serial Adaptor
st
August 08
29