AD9510-VCO/PCB Analog Devices Inc, AD9510-VCO/PCB Datasheet - Page 3

• Manufacturer Part Number: AD9510-VCO/PCB
• Description: BOARD EVAL CLOCK DISTR 64LFCSP
• Manufacturer: Analog Devices Inc

Specifications of AD9510-VCO/PCB

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

EVALUATION BOARD REQUIREMENTS
SYSTEM FEATURES
In order to run the evaluation software, the following system
features are needed:
Operating System
Microsoft® Windows® 98, Windows® ME, Windows® 2000, or
Windows® XP.
Display
Designed for XGA with 1024 × 768 display resolution,
800 × 600 minimum recommended display resolution.
PC
A Pentium® II-class or higher recommended.
Disk Space
6 MB or more.
I/O Port
USB port.
Rev. 0 | Page 3 of 28
HARDWARE NEEDS
Before using the AD9510 evaluation board, take a moment to
verify that you have the following hardware:
Power Supplies
The AD9510/PCB requires at least two independent power
supplies, one for V_OSC/VCP (3.3 V to 5 V) and one for
AVDD/DVDD/VCC_USB (3.3 V ± 5% on the board).
Function Generators
A signal source (crystal oscillator, function generator) is
required to clock the AD9510.
Measurement
An appropriate measurement device such as a spectrum
analyzer or a high bandwidth oscilloscope is needed.
AD9510/PCB