AD9510-VCO/PCB Analog Devices Inc, AD9510-VCO/PCB Datasheet - Page 23

• Manufacturer Part Number: AD9510-VCO/PCB
• Description: BOARD EVAL CLOCK DISTR 64LFCSP
• Manufacturer: Analog Devices Inc

Specifications of AD9510-VCO/PCB

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

AD9510/PCB
Sync Mode Setup Window
The sync mode setup window (Figure 30) lets you control the various sync settings in the AD9510. There is an option for sync enable,
interrupt timing, and soft sync. The soft sync check box is used to issue a software sync command. To issue this command, the soft sync
bit must be set and then cleared. This requires two separate load commands, one to set the bit and one to clear the bit. While the bit is set,
all of the outputs are frozen in a high or low state. The high or low state is determined by the start high or start low setting for each
output, and the complimentary outputs are frozen opposite the true outputs. For each of these options, please refer to the AD9510 data
sheet for more information.
MULTI-CHIP ENABLE
INTERRUPT TIMING
SOFT SYNC
Figure 30. Sync Mode Setup Window
Rev. 0 | Page 23 of 28