AD9510-VCO/PCB Analog Devices Inc, AD9510-VCO/PCB Datasheet - Page 13

• Manufacturer Part Number: AD9510-VCO/PCB
• Description: BOARD EVAL CLOCK DISTR 64LFCSP
• Manufacturer: Analog Devices Inc

Specifications of AD9510-VCO/PCB

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

CONFIGURING THE EVALUATION BOARD
Saving and Loading User Settings
The AD9510 evaluation software allows you to save and load AD9510 configurations. This is accomplished through the File Menu and
the Save or Load Setup commands.
1.
2.
3.
The AD9510 is shipped with a setup/configuration file to configure the AD9510 to run with the default VCXO and PLL configuration.
This configuration file assumes a REFCLK frequency of 61.44 MHz and a VCXO of 245.76 MHz. The divider values are R = 4, N = 16
(A = 2, B = 7, P = 2/3). This yields a PFD frequency of 15.36 MHz. The REFCLK frequency can be changed as long as the R divider is
altered so that 15.36 MHz is still the input frequency to the PFD.
Serial Control Port Options
The serial control port on the AD9510 has several configuration options. These can be controlled by selecting the Configure Serial Port
option under the I/O menu, which opens the Serial Port Config window. (see Figure 14 below).
Select File > Save Setup.
Select the directory and file name where you want to save the current user configuration. The default file name is Settings.stp.
All settings are saved together.
To reload these settings at any time, select File > Load Setup. A window appears and opens to the default directory,
C:\Program Files\ADI\AD9510 Eval Software. From here, you may choose the desired setup.
Figure 14. SPI Port Configuration
Rev. 0 | Page 13 of 28
AD9510/PCB