PG-FP4-E Renesas Electronics America, PG-FP4-E Datasheet - Page 83

• Manufacturer Part Number: PG-FP4-E
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP4-E

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

[Program >]
[Erase >]
[Verify >]
[Security >]
[Checksum >]
[Blank check >]
[Signature >]
[Prog Area >]
Notes 1. Download the user program in advance in the GUI software mode.
↓ Next button
↓ Next button
↓ Next button
↓ Next button
↓ Next button
↓ Next button
↓ Next button
2. This command is valid only with a single-power-supply flash memory microcontroller. If any other
3. This is valid for the programming area (Chip, Block and Area) currently set for the PG-FP4.
microcontroller is used, this command is not displayed.
When the Enter button is pressed next, the target device connected to the PG-FP4 is
programmed
When the Enter button is pressed next, the target device connected to the PG-FP4 is
erased
When the Enter button is pressed next, the target device connected to the PG-FP4 is
verified
When the Enter button is pressed next, the security flag of the target device connected to the
PG-FP4 is programmed
When the Enter button is pressed next, the checksum value (entire flash memory area of the
target device) of the target device connected to the PG-FP4 is read. The read checksum
value will be displayed on the message display
When the Enter button is pressed next, blank check of the target device connected to the
PG-FP4 is executed
When the Enter button is pressed next, the signature of the target device connected to the
PG-FP4 is read. The device name is displayed on the message display.
When the Enter button is pressed next, the valid memory area (Area 0 or Area 1) is changed
if the 2 MB user program area is used as two independent 1 MB memory areas (Area 0 and
Area 1).
If the 2 MB area is used as one user program area, the valid memory area cannot be
changed by using this menu.
Check the memory area currently selected, by using Prog Area of Option Setting.
Display example
• Display example (when Enter button is pressed)
• Display example (when Enter button is pressed)
CHAPTER 6 PG-FP4 OPERATION IN STANDALONE MODE
Note 3
Signature:
D70F3025A
Commands
Prog Area now: 0 (The valid memory area is changed from Area 1 to Area 0.)
Commands
Prog Area (dis.) (The valid memory area cannot be changed.)
Notes 1, 3
.
.
Notes 1, 3
.
Note 3
User’s Manual U15260EJ4V0UM
.
Note 2
.
Notes 2, 3
.
81