PG-FP4-E Renesas Electronics America, PG-FP4-E Datasheet - Page 13

• Manufacturer Part Number: PG-FP4-E
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP4-E

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

single-chip microcontroller on the target board or FA adapter board. This product can be used in graphical user
interface (GUI) mode using a host computer or in standalone mode.
1.1
1.2
The PG-FP4 is a tool that erases, writes, and verifies programs on an NEC Electronics on-chip flash memory
• The PG-FP4 allows on-board programming without removing the target device from the target system.
• The user program is stored in the internal 2 MB flash memory of the PG-FP4 and parameters for programming
• Serial interface connection (RS-232C) to host systems, parallel interface for optional fast program download and
• CSI, CSI+H/S, UART, I
• Programming voltage V
• The PG-FP4 can supply 0 to 6 V on the V
The configuration of the PG-FP4 in GUI software mode is shown in the diagram below.
GUI software
are stored in 8 KB EEPROM
to connect the PG-FP4 to a host.
a USB interface are available.
operation
Features
PG-FP4 Configuration in Graphical User Interface (GUI) Mode
INI file
USB/
RS-232C
Logfile
2
C and PORT interfaces are supported for data transfer to the target device.
PP
Figure 1-1. PG-FP4 Configuration in GUI Software Mode
can be selected from between 0 and 12 V.
TM
, so that the target device can be rewritten in the standalone mode, without having
Upload/download a target program
into PG-FP4
Next
Enter
Cancel
Calculate
checksum
CHAPTER 1 OVERVIEW
PG-FP4
User’s Manual U15260EJ4V0UM
DD
line (200 mA max.).
1 MB
1 MB
(FlashPro4
)
Hex Editor to modify
memory contents
Store in
EEPROM
Device parameter setup
Use as one storage area or
split into two areas
• On-board programming
• FA adapter programming
PRM file
SET file
11