ST7MDTU2-EMU2B STMicroelectronics, ST7MDTU2-EMU2B Datasheet - Page 58

• Manufacturer Part Number: ST7MDTU2-EMU2B
• Description: KIT EMULATOR FOR ST7262X/7261X
• Manufacturer: STMicroelectronics
• Series: ST7-EMU2Br
• Type: Microcontrollerr

Specifications of ST7MDTU2-EMU2B

• Contents: Main Emulation Board (MEB), Target Emulation Board (TEB), Cables, Power Supply and Documentation
• For Use With/related Products: ST7262x, ST7621x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-4881

4 - Emulator Features
4.5
58/77
Analyser probe input signals
The ST7 HDS2 allows you to use 4 external input signals (TTL level). These
signals are on pins 6,7,8,9 of the Analyser Probe connector located on the front
panel of the emulator as shown below.
You can view these probe inputs using STVD7. From the main menu, select
View>Trace . The input signal values are listed under the Sig column (AL3..0).
STVD7’s Logical Analyser allows you to use these input signals to define trace
filtering or output trigger events. From the main menu, select Tools>Logical
Analyser to open the dialog box. A full description of how to use this facility to
control trace recording or trigger output signals is given in the STVD7 online help.
A rainbow-colored cable will also be delivered to connect your application to these
inlets. Each red connector is to be connected to your signal. Each black connector
is to be connected to the reference ground for the signal.
Colors are attributed as follows:
•
•
•
•
AL0 is to be taken between the RED (signal) and BROWN (ground) wires
AL1 is to be taken between the YELLOW (signal) and ORANGE (ground)
wires.
AL2 is to be taken between the BLUE (signal) and GREEN (ground) wires.
AL3 is to be taken between the GREY (signal) and PURPLE (ground) wires.
5
V
9
CC
AL3 AL2 AL1 AL0
4
8
3
7
2
6
1
ST7MDTU2-EMU2B User Manual
GND