C8051F040-TB Silicon Laboratories Inc, C8051F040-TB Datasheet - Page 246

• Manufacturer Part Number: C8051F040-TB
• Description: BOARD PROTOTYPING W/C8051F040
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F040-TB

• Contents: Board
• Processor To Be Evaluated: C8051F04x
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F040
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

C8051F040/1/2/3/4/5/6/7
Setting the SMBus0 Free Timer Enable bit (FTE, SMB0CN.1) to logic 1 enables the timer in SMB0CR.
When SCL goes high, the timer in SMB0CR counts up. A timer overflow indicates a free bus timeout: if
SMBus0 is waiting to generate a START, it will do so after this timeout. The bus free period should be less
than 50 µs (see SFR Definition 19.2, SMBus0 Clock Rate Register).
When the TOE bit in SMB0CN is set to logic 1, Timer 4 is used to detect SCL low timeouts. If Timer 4 is
enabled (see
Section “23.2. Timer 2, Timer 3, and Timer 4” on page
295), Timer 4 is forced to reload
when SCL is high, and forced to count when SCL is low. With Timer 4 enabled and configured to overflow
after 25 ms (and TOE set), a Timer 4 overflow indicates a SCL low timeout; the Timer 4 interrupt service
routine can then be used to reset SMBus0 communication in the event of an SCL low timeout.
246
Rev. 1.5