C8051F020-TB Silicon Laboratories Inc, C8051F020-TB Datasheet - Page 30

• Manufacturer Part Number: C8051F020-TB
• Description: BOARD PROTOTYPING W/C8051F020
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F020-TB

• Contents: Board
• Processor To Be Evaluated: C8051F02x
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

C8051F020/1/2/3
1.9.
Each C8051F020/1/2/3 MCU has two 12-bit DACs and two comparators on chip. The MCU data and control inter-
face to each comparator and DAC is via the Special Function Registers. The MCU can place any DAC or comparator
in low power shutdown mode.
The comparators have software programmable hysteresis. Each comparator can generate an interrupt on its rising
edge, falling edge, or both; these interrupts are capable of waking up the MCU from sleep mode. The comparators'
output state can also be polled in software. The comparator outputs can be programmed to appear on the Port I/O pins
via the Crossbar.
The DACs are voltage output mode, and include a flexible output scheduling mechanism. This scheduling mecha-
nism allows DAC output updates to be forced by a software write or a Timer 2, 3, or 4 overflow. The DAC voltage
reference is supplied via the dedicated VREFD input pin on C8051F020/2 devices or via the internal voltage refer-
ence on C8051F021/3 devices. The DACs are especially useful as references for the comparators or offsets for the
differential inputs of the ADC.
30
Comparators and DACs
(Port I/O)
(Port I/O)
CP0+
CP0-
CP1+
CP1-
DAC0
DAC1
Figure 1.13. Comparator and DAC Diagram
+
-
+
-
CP0
CP1
CP0
CP1
DAC0
DAC1
REF
REF
CROSSBAR
Rev. 1.4
CP0
CP1
SFR's
(Data
Cntrl)
and
Interrupt
Handler
CIP-51
and