C8051F300-TB Silicon Laboratories Inc, C8051F300-TB Datasheet - Page 22

• Manufacturer Part Number: C8051F300-TB
• Description: BOARD PROTOTYPING W/C8051F300
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F300-TB

• Contents: Board
• Data Bus Width: 8 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F300
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

C8051F300/1/2/3/4/5
1.7.
The C8051F300/2 includes an on-chip 8-bit SAR ADC with a 10-channel differential input multiplexer and
programmable gain amplifier. With a maximum throughput of 500 ksps, the ADC offers true 8-bit accuracy
with an INL of ±1LSB. The ADC system includes a configurable analog multiplexer that selects both posi-
tive and negative ADC inputs. Each Port pin is available as an ADC input; additionally, the on-chip Temper-
ature Sensor output and the power supply voltage (V
shut down the ADC to save power.
The integrated programmable gain amplifier (PGA) amplifies the ADC input by 0.5, 1, 2, or 4 as defined by
user software. The gain stage is especially useful when different ADC input channels have widely varied
input voltage signals, or when it is necessary to "zoom in" on a signal with a large DC offset.
Conversions can be started in five ways: a software command, an overflow of Timer 0, 1, or 2, or an exter-
nal convert start signal. This flexibility allows the start of conversion to be triggered by software events, a
periodic signal (timer overflows), or external HW signals. Conversion completions are indicated by a status
bit and an interrupt (if enabled). The resulting 8-bit data word is latched into an SFR upon completion of a
conversion.
Window compare registers for the ADC data can be configured to interrupt the controller when ADC data is
either within or outside of a specified range. The ADC can monitor a key voltage continuously in back-
ground mode, but not interrupt the controller unless the converted data is within/outside the specified
range.
22
Sensor
Temp
8-Bit Analog to Digital Converter (C8051F300/2 Only)
DGND
Analog Multiplexer
VDD
P0.0
P0.1
P0.2
P0.3
P0.4
P0.5
P0.6
P0.7
P0.0
P0.1
P0.2
P0.3
P0.4
P0.5
P0.6
P0.7
10-to-1
AMUX
AMUX
9-to-1
Figure 1.10. 8-Bit ADC Block Diagram
Programmable Gain
X
Configuration, Control, and Data Registers
Amplifier
Rev. 2.9
+
-
VDD
DD
) are available as ADC inputs. User firmware may
ADC
8-Bit
SAR
End of
Conversion
Interrupt
Conversion
Start
Window Compare
8
Logic
Software Write
T0 Overflow
TMR2 Overflow
T1 Overflow
External
Convert Start
ADC Data
Register
Window
Compare
Interrupt