CT-161-CD Fujitsu Semiconductor America Inc, CT-161-CD Datasheet - Page 53

• Manufacturer Part Number: CT-161-CD
• Description: KIT 16LX FOR MB90F387
• Manufacturer: Fujitsu Semiconductor America Inc
• Series: F²MC-16LXr
• Type: MCUr

Specifications of CT-161-CD

• Contents: Board, Cable, CD
• For Use With/related Products: MB90F387S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 865-1103

© Fujitsu
2.5.2
Let us now create the actual program.
Appendix A.1, open the source file "main.c" stored in ”sample.prj”, and input the program
portion (after "while (1)") enclosed by dotted line in Figure 2.11 to the LED lighting
program created in Section 2.4.2. Use the files other than "main.c" without modification.
After the input of the program, build the program according to the procedure described in
Appendix A.2. If an error message is output, check that the content of the input program
is exactly the same as the description shown in Figure 2.11. When the build operation
ends successfully, ACCEMIC MDE starts automatically.
After the ACCEMIC MDE window appears, execute the program and check its operation.
For how to execute the program, see Appendix A.3. While the program is executed, you
can see that LED5 goes on on the board.
Creating and executing of program
Figure 2.10
Set P14 output level to high (PDR1.bit4=1).
Set P14 output level to low (PDR1.bit4=0).
Set P14 output level to low (PDR1.bit4=0).
Flow of the program to make LED5 blinking
Count reached 30000?
Count reached 30000?
Set P14 to output mode
Set LED5 to off.
Set LED5 to on.
Set LED5 to on.
(DDR1.bit4=1)
-
START
47
-
yes
yes
According to the procedure described in
no
no
(2)
(1)
(3)
(6)
(4)
(5)