EVAL-AD7674CB Analog Devices Inc, EVAL-AD7674CB Datasheet - Page 15

• Manufacturer Part Number: EVAL-AD7674CB
• Description: BOARD EVAL FOR AD7674
• Manufacturer: Analog Devices Inc
• Series: PulSAR®r

Specifications of EVAL-AD7674CB

• Number Of Adc's: 1
• Number Of Bits: 18
• Sampling Rate (per Second): 800k
• Data Interface: Serial, Parallel
• Inputs Per Adc: 1 Differential
• Input Range: 0 ~ 5 V
• Power (typ) @ Conditions: 126mW @ 800kSPS
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: AD7674
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Preliminary Technical Data
1) The Run button starts the software. This button
must be pressed first.
These controls are for locking and resetting the display
axis to the data minimum and maximum values.
6) Documentation (F2) gives direct access to datasheets and
evaluation documentation.
5) This window allow the samples to be taken once (F3) or continuous (F4).
Also selects: Help screen, Save data (F5), Print (F8) and Quit (F10). The Help
menu shows a description of the functionality of the chosen command.
3) Input configurations are chosen here. The available choices
are: Mode (conversion), Power, Reset, Coding and Interface
Mode (digital).
This is the performance window.
Rev. PrW | Page 15 of 22
Figure 11. Setup Screen
2) The part under evaluation is chosen from this
menu. The device must be selected second.
4) This window is used to select the
test type, number of Ksamples, and
conversion mode (continuous or
burst). For the test type choose
from either:
Histogram test
AC Test
Decimated AC Test
EVAL-AD76XXCB