ADV212-HD-EB Analog Devices Inc, ADV212-HD-EB Datasheet - Page 31

• Manufacturer Part Number: ADV212-HD-EB
• Description: BOARD EVALUATION FOR ADV212-HD
• Manufacturer: Analog Devices Inc

Specifications of ADV212-HD-EB

• Main Purpose: Video, Video Processing
• Embedded: Yes, FPGA / CPLD
• Utilized Ic / Part: ADV212-HD
• Primary Attributes: 1080i and 720p SDI Compatible, 32/64-bit, 33/66 MHz PCI Card
• Secondary Attributes: GUI, JPEG2000 Video Codec
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

HARDWARE BOOT MODES AND POWER
CONSIDERATIONS
The boot mode can be configured via hardware using the CFG
pins or via software. The first boot mode after power-up is set
by the CFG pins and should always be as described in the pin
listing. CFG1 is tied to IOVDD through a 10 k resistor and
CFG2 is tied to GND through a 10 k resistor.
Rev. B | Page 31 of 44
There is no special power sequencing requirement for VDD and
IOVDD.
It is strongly recommended that the user place a small decoup-
ling cap close to every power pin and at least one bulk cap on
each supply.
ADV212