SWS600L-24 TDK Corporation, SWS600L-24 Datasheet - Page 4

• Manufacturer Part Number: SWS600L-24
• Description: POWER SUPPLY 24V 27A SGL OUTPUT
• Manufacturer: TDK Corporation
• Series: SWSr
• Type: Commercialr

Specifications of SWS600L-24

• Power Supply Type: Switching (Closed Frame)
• Voltage - Output: 24V
• Number Of Outputs: 1
• Power (watts): 600W
• Applications: Commercial
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 24 VDC @ 27A
• Size / Dimension: 7.48" L x 4.72" W x 2.4" H (190mm x 120mm x 61mm)
• Power (watts) - Rated: 648W
• Operating Temperature: -20°C ~ 74°C
• Efficiency: 84%
• Approvals: CSA, DENAN, EN, IEC, UL
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 27A
• Power Rating: 648W
• Input Voltage: 85V AC To 265V AC / 120V DC To 350V DC
• Brand/series: SWS Series
• Configuration: Enclosed
• Output: 24 VDC @ 27 A
• Power, Output: 648 W
• Primary Type: AC-DC
• Special Features: Parallelable, PFC, Remote On/Off, Remote Sense
• Voltage, Input: 85 to 265/120 to 350 VAC/VDC
• Voltage, Output: 24 VDC
• Input Frequency: 47 to 63Hz
• Screening Level: Commercial
• Operating Temperature Min Deg. C: -20C
• Mounting Style: Desktop
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1742; SWS600L24

4
SWS
(*10) Measured by each measuring method of UL, CSA, EN and DENAN (at 60Hz), Ta=25°C.
(*11) Refer to output derating curve for details of output derating versus ambient temperature.
(*13) Category 4 exposure levels: Trunk transportation over U.S. highways, composite two-wheeled trailer.
(*14) As for DENAN, designed to meet at 100VAC.
ITEMS/UNITS
Output
(*1) ( ): Peak output current is possible at 170-265VAC input range, operating period at peak output current is less than 10sec, duty less than 35%.
(*2) At maximum output power, nominal input voltage, Ta=25°C.
(*3) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100-240VAC, 50/60Hz on name plate.
(*4) First/second inrush current, not applicable for the in-rush current to noise fi lter for less than 0.2ms.
(*5) Please refer to Fig A for measurement of line & load regulation, ripple and noise voltage.
(*6) 85-265VAC, constant load.
(*7) No load - full load (maximum power), constant input voltage.
(*8) Constant current limit with automatic recovery.
(*9) OVP circuit will shutdown output, manual reset. (Remote ON/OFF control reset or re-power on).
Function
Environment
Isolation
Standards
Mechanical
Input
Average output power and current is less than maximum output power and maximum output current.
Ripple & noise are measured at 20MHz by using a twisted pair of load wires terminated with a 0.1uF and 47uF capacitor.
- Load (%) is percent of maximum output power and maximum output current (Item 2 and 3).
- 100% load start up at -40°C is possible. However, it may not fulfi l all the specifi cations.
Avoid to operate at overload or dead short for more than 30 seconds.
Do not exceed derating of maximum output power and maximum output current.
Voltage Range
Frequency
Power Factor (115/230VAC) (typ) (*2)
Effi ciency (115/230VAC) (typ) (*2)
Current (115/230VAC) (typ) (*2)
Inrush Current (typ)
Leakage Current
Nominal Voltage
Maximum Current (Peak Current) (*1)
Maximum Power (Peak Power) (*1)
Maximum Line Regulation (*5)(*6) mV
Maximum Load Regulation (*5)(*7) mV
Temperature Coeffi cient
Maximum Ripple & Noise (115/230VAC) (0≤Ta≤74°C) (*5) mVp-p
Maximum Ripple & Noise (115/230VAC) (-20≤Ta<0°C) (*5) mVp-p
Hold-up Time (115/230VAC) (typ) (*2)
Voltage Adjustable Range
Over Current Protection
Over Voltage Protection
Remote Sensing
Remote ON/OFF Control
Parallel Operation
Series Operation
Monitoring Signal
Line DIP
Operating Temperature (*11)
Storage Temperature
Operating Humidity
Storage Humidity
Vibration
Shock (In package)
Cooling
Withstand Voltage
Isolation Resistance
Safety Standards
PFHC
EMI
Immunity
Weight (typ)
Size (W×H×D)
600L
(*10) mA
(*12)
(*13)
(*3)
(*3)
(*4)
(*8)
(*9) VDC 4.12-5.61 6.25-7.25 15.0-17.4 20.2-23.4 30.0-34.8 45.0-52.2 58.5-68.2 69.0-81.0
VDC
VDC 2.64-3.96
％ RH
％ RH
MODEL SWS600L-3
mm
ms
Hz
％
℃
℃
W
A
A
A
SWS600L Specifications
V
Input-FG, Input-Output and Output-FG: More than 50MΩ (500VDC), Output-CNT/ALM/AUX: More than 50MΩ (100VDC) at Ta=25°C and 70%RH
Approved by UL60950-1, CSA60950-1, EN60950-1, EN50178, Designed to meet DENAN, EN61010-1
Designed to meet EN61000-4-2 (Level 2,3), -3 (Level 3), -4 (Level 3), -5 (Level 3,4), -6 (Level 3), -8 (Level 4), -11
Input-Output : 3.0kVAC (20mA), Input-FG : 2.0kVAC (20mA), Output-FG : 500VAC (100mA),
5.0 /2.5
70/72
396
3.3
-20 to +74°C (-20°C to +50°C: 100%, +74°C: 50%), 100% load start up at -40°C
(60V model: 651VAC (130mA)), Output-CNT/ALM/AUX : 100VAC (100mA) for 1min.
20A/40A at 115VAC, 40A/40A at 230VAC, Ta=25°C (fi rst inrush/second inrush)
>126
120
120
160
20
30
SWS600L-5 SWS600L-12 SWS600L-15 SWS600L-24 SWS600L-36 SWS600L-48 SWS600L-60
4.0-6.0
75/77
600
5
Designed to meet VCCI-B, FCC-B, EN55011/EN55022-B
Less than 0.75, 0.3 (typ) at 115VAC / 0.5 (typ) at 230VAC
Designed to meet MIL-STD-810F 514.5 Category 4, 10
Designed to meet MIL-STD-810F 516.5 Procedure I,VI
Designed to meet SEMI-F47 (200VAC line only)
9.6-14.4 12.0-19.5 19.2-28.8 28.8-43.2 38.4-56.0 48.0-66.0
120 x 61 x 190 (Refer to Outline Drawing)
>55.7
636
12
53
48
72
Designed to meet IEC61000-3-2
79 / 82
ALM (Open Collector Output)
20 - 90 %RH (No dewdrop)
10 - 95%RH (No dewdrop)
AC85-265 or DC120-350
Forced air by build-in fan
Less than 0.02%/°C
>45.1
645
150
180
15
43
60
90
-40 to +85°C
0.98/0.95
Possible
Possible
Possible
Possible
47-63
1.6kg
20
648 (744)
7.1 / 3.6
27 (31)
・All specifications are subject to change without notice.
81/84
>31.3
144
Measurement point for Vo Line/Load Regulation.
24
96
>18.9
648
144
216
36
18
+Ｖ
Measurement point for Ripple and Noise.
150ｍｍ
-Ｖ
47μ
+
624 (720)
82 / 84
13 (15)
>15.2
192
288
200
240
48
Fig.A
0.1μ
A
>10.5
600
240
360
60
10