MIKROE-995 mikroElektronika, MIKROE-995 Datasheet - Page 24

• Manufacturer Part Number: MIKROE-995
• Description: Development Boards & Kits - PIC / DSPIC EasyPIC PRO v7
• Manufacturer: mikroElektronika

Specifications of MIKROE-995

• Rohs: yes
• Product: Development Boards
• Interface Type: I2C, SPI
• Operating Supply Voltage: 7 VAC to 23 VAC, 9 VDC to 32 VDC

USB device
communication
USB is the acronym for Universal Serial Bus.
This is a very popular industry standard that
defines cables, connectors and protocols used
for communication and power supply between
computers and other devices. EasyPIC PRO
contains USB DEVICE connector (CN9) which
enables microcontrollers that support USB
communication to establish a connection
with the target host (eg. PC, Laptop, etc). USB
data lines comming from the MCU socket are
dedicated to USB connector only, and are
not available via PORT headers. To enable
USB communication, you have to solder SMD
jumpers on the MCU card to the appropriate
USB position. This only makes sense if the
MCU card contains microcontroller with
integrated USB
cards is Standard 80-pin MCU card with
PIC18F87J50 microcontroller.
page 24
controller. One of these
™
v7
Microcontroller with USB support
should be soldered to the MCU
card with dedicated USB SMD
jumpers. Make sure to solder RF1,
RF3 and RF4 jumpers to USB
position in order to connect USB
lines to USB connector.
Enabling USB
Figure 10-1: USB connection schematics
EasyPIC PRO
v7