MIKROE-995 mikroElektronika, MIKROE-995 Datasheet - Page 10

• Manufacturer Part Number: MIKROE-995
• Description: Development Boards & Kits - PIC / DSPIC EasyPIC PRO v7
• Manufacturer: mikroElektronika

Specifications of MIKROE-995

• Rohs: yes
• Product: Development Boards
• Interface Type: I2C, SPI
• Operating Supply Voltage: 7 VAC to 23 VAC, 9 VDC to 32 VDC

page 10
How to properly place your MCU card into the socket?
Before you plug the microcontroller card into
the socket, make sure that the power supply is
turned off. Images below show how to correctly
plug the card. First make sure that MCU card
orientation matches the silkscreen outline on the
1
Figure 4-3: On-board
MCU socket has silksreen
markings which will help
you to correctly orient the
MCU card before inserting.
EasyPIC PRO
card over the socket, so each male header encloses
the right angle with the female socket, as shown
in Figure 4-4. Then put the MCU card slowly down
until all the pins match the socket. Check again if
2
Figure 4-4: Place the
MCU card on the socket
so the pins are aligned
correctly.
™
v7 board MCU socket. Place the MCU
everything is placed correctly and press the MCU
card until it is completely plugged into the socket
as shown in Figure 4-5. If done correctly, all pins
should be fully inserted. Only now you can turn on
the power supply.
3
Figure 4-5 Properly
placed MCU card will
have equally leveled
pins.
EasyPIC PRO
v7