MIKROE-11 mikroElektronika, MIKROE-11 Datasheet - Page 9

• Manufacturer Part Number: MIKROE-11
• Description: Development Boards & Kits - AVR BIGAVR2 DEVELOPMENT SYSTEM
• Manufacturer: mikroElektronika

Specifications of MIKROE-11

• Rohs: yes
• Product: Development Kits
• Tool Is For Evaluation Of: ATMEGA128
• Core: AVR8
• Interface Type: IDC10, JTAG, RS-232, USB
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 bit
• For Use With: ATmega, AT90

MCU CARD
BIGAVR2 is delivered with the 64-pin microcontroller ATmega128. The user can remove
MCU card with this chip and fit another MCU card with another microcontroller such as
ATmega1280 (100-pins).
When placing MCU card on the BIGAVR2 MCU socket, it is necessary to follow steps
below:
Step no. 1
If MCU card is already placed on
BIGAVR2, you should remove it by
slowly pulling it up.
Step no. 2
Place another MCU card on
the board. Note that label on
the MCU card must be in the
upper-left corner as it is drawn
on the BIGAVR2 board.
Figure 5
MCU card
Step no. 3
When the MCU card is properly
placed, push it down by apply-
ing pressure on all edges at the
same time.
9