LPC1114FHN33/302 NXP Semiconductors, LPC1114FHN33/302 Datasheet - Page 50

• Manufacturer Part Number: LPC1114FHN33/302
• Description: ARM Microcontrollers - MCU 32b 32K Flash 42I/O
• Manufacturer: NXP Semiconductors

Specifications of LPC1114FHN33/302

• Rohs: yes
• Core: ARM Cortex M0
• Processor Series: LPC1114
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 32 KB
• Data Ram Size: 8 KB
• Package / Case: HVQFN-33
• Mounting Style: SMD/SMT
• Interface Type: I2C, SPI, SSP, UART
• Maximum Operating Temperature: + 85 C
• Number Of Programmable I/os: 42
• Number Of Timers: 4
• Program Memory Type: Flash
• Factory Pack Quantity: 260
• Tradename: LPC1100L

NXP Semiconductors
LPC111X
Product data sheet
Fig 15. LPC1110/11/12/13/14/15 clock generation block diagram
watchdog oscillator
system oscillator
IRC oscillator
IRC oscillator
(system PLL clock select)
7.16.1.1 Internal RC oscillator
7.16.1.2 System oscillator
SYSPLLCLKSEL
Following reset, the LPC1110/11/12/13/14/15 will operate from the Internal RC oscillator
until switched by software. This allows systems to operate without any external crystal and
the bootloader code to operate at a known frequency.
See
The IRC may be used as the clock source for the WDT, and/or as the clock that drives the
PLL and subsequently the CPU. The nominal IRC frequency is 12 MHz. The IRC is
trimmed to 1 % accuracy over the entire voltage and temperature range.
Upon power-up or any chip reset, the LPC1110/11/12/13/14/15 use the IRC as the clock
source. Software may later switch to one of the other available clock sources.
The system oscillator can be used as the clock source for the CPU, with or without using
the PLL.
Figure 15
SYSTEM PLL
(main clock select)
MAINCLKSEL
for an overview of the LPC1110/11/12/13/14/15 clock generation.
All information provided in this document is subject to legal disclaimers.
main clock
Rev. 8 — 20 February 2013
watchdog oscillator
watchdog oscillator
system oscillator
SYSTEM CLOCK
IRC oscillator
IRC oscillator
DIVIDER
(WDT clock update enable)
(CLKOUT update enable)
LPC1110/11/12/13/14/15
CLKOUTUEN
WDTUEN
system clock
32-bit ARM Cortex-M0 microcontroller
SYSAHBCLKCTRL[1:18]
(AHB clock enable)
CLKOUT PIN CLOCK
UART PERIPHERAL
SPI0 PERIPHERAL
SPI1 PERIPHERAL
CLOCK DIVIDER
CLOCK DIVIDER
CLOCK DIVIDER
18
WDT CLOCK
DIVIDER
DIVIDER
© NXP B.V. 2013. All rights reserved.
AHB clocks 1 to 18
(memories
and peripherals)
AHB clock 0
(system)
SPI0
UART
SPI1
WDT
CLKOUT pin
002aae514
50 of 114