2726188 Phoenix Contact, 2726188 Datasheet - Page 68

• Manufacturer Part Number: 2726188
• Description: INTERBUS Bus Coupler
• Manufacturer: Phoenix Contact

IL SYS INST UM E
Additional labeling
6-8
PHOENIX CONTACT
In addition to this connector marking, you can identify the slots, terminal points, and
connections using Zack marker strips and labeling fields.
Figure 6-7
Various options are available for labeling the slots and terminal points:
1
2/3
4/5
6
Using the marker strips on the connector and on the electronics base, you can clearly assign
both connector and slot.
Insert strips for use with a laser printer are available for insertion in the IB IL FIELD 2 and
IB IL FIELD 8 labeling fields (see "Ordering data for accessories" on page 11-7).
The components required for labeling are listed in the Phoenix Contact "CLIPLINE"
catalog.
6
Each connector can be labeled individually using Zack marker strips.
Another option is to use a labeling field. Labeling fields are available in two widths,
either as a labeling field covering one connector (2; IB IL FIELD 2) or as a labeling
field covering four connectors (3; IB IL FIELD 8). You can label each channel
individually with free text. On the upper part of the connector there is a keyway for
attaching this labeling field. The labeling field can be tilted up and down. In each
end position a light latching ensures that the labeling field remains in place.
Each signal can be labeled individually using Zack marker strips. On a double
signal connector, the upper keyway (4) is designed for labeling signals 1 and 2 and
the lower keyway (5) is for signals 3 and 4.
On the electronics base, each slot can be labeled individually using Zack marker
strips. These marker strips are covered when a connector is plugged in.
Labeling
1
2
4
3
5
5520D036
6452_en_02