2726188 Phoenix Contact, 2726188 Datasheet - Page 125

• Manufacturer Part Number: 2726188
• Description: INTERBUS Bus Coupler
• Manufacturer: Phoenix Contact

Shield connection clamp
6452_en_02
The shield connection clamp (a in Figure 10-4, detail B) in the shield connection can be
used in various ways depending on the cable cross-section. For thicker cables (e.g., bus
cable), the dip in the clamp must be turned away from the cable (Figure 10-4, detail B). For
thinner cables, the dip in the clamp must be turned towards the cable (Figure 10-4, detail F).
If you need to change the position of the shield connection clamp, proceed as shown in
Figure 10-4:
•
•
•
•
Figure 10-4
Open the shield connection housing (detail A).
The shield connection is delivered with the clamp positioned for connecting thicker
cables (detail B).
Remove the clamp (detail C), turn it to suit the cross-section of the cable (detail D), then
reinsert the clamp (detail E).
Detail F shows the position of the clamp for a thin cable.
Shield connection clamp alignment
PHOENIX CONTACT
Connecting cables
10-5