2726188 Phoenix Contact, 2726188 Datasheet - Page 139

• Manufacturer Part Number: 2726188
• Description: INTERBUS Bus Coupler
• Manufacturer: Phoenix Contact

6452_en_02
10.5.3
The brake module can be used to control the brake on motors with a brake. It contains a
passive semiconductor, which can be used for quick motor braking. The brake module is
designed for motors with a nominal voltage of 400 V AC.
Assemble the connector for the brake as shown in Figure 10-18:
•
•
•
Figure 10-18
The brake module is snapped into connection X8 of a power-level terminal using a 3-pos.
inverted COMBICON connector. The 2-pos. COMBICON connector for the brake is
snapped into connection X9 of the brake module.
Make sure that the brake is connected with the correct polarity, otherwise it may not
operate correctly.
Strip approximately 30 mm off the outer cable sheath (detail A).
Strip approximately 7 mm off the wires (detail B).
Fit the wire ends with ferrules and connect the wires to the connector (detail C).
Connecting the brake module and brake (optional)
Assembling the connector for the brake
PHOENIX CONTACT
Connecting cables
10-19