PIC12F1822 MICROCHIP [Microchip Technology], PIC12F1822 Datasheet - Page 196

• Manufacturer Part Number: PIC12F1822
• Description: 8/14-Pin Flash Microcontrollers with nanoWatt XLP Technology
• Manufacturer: MICROCHIP [Microchip Technology]

PIC12F/LF1822/16F/LF1823
REGISTER 22-3:
DS41413A-page 196
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5
bit 4
bit 3-0
Note 1:
MDCHODIS
R/W-x/u
Narrowed carrier pulse widths or spurs may occur in the signal stream if the carrier is not synchronized.
MDCHODIS: Modulator High Carrier Output Disable bit
1 = Output signal driving the peripheral output pin (selected by MDCH<3:0>) is disabled
0 = Output signal driving the peripheral output pin (selected by MDCH<3:0>) is enabled
MDCHPOL: Modulator High Carrier Polarity Select bit
1 = Selected high carrier signal is inverted
0 = Selected high carrier signal is not inverted
MDCHSYNC: Modulator High Carrier Synchronization Enable bit
1 = Modulator waits for a falling edge on the high time carrier signal before allowing a switch to the
0 = Modulator Output is not synchronized to the high time carrier signal
Unimplemented: Read as ‘0’
MDCH<3:0> Modulator Data High Carrier Selection bits
1111 = Reserved. No channel connected.
1000 = Reserved. No channel connected.
0111 = Reserved. No channel connected.
0110 = Reserved. No channel connected.
0101 = Reserved. No channel connected.
0100 = CCP1 output (PWM Output mode only)
0011 = Reference Clock module signal
0010 = Reserved. No channel connected.
0001 = MDCIN1 port pin
0000 = V
MDCHPOL
R/W-x/u
low time carrier
•
•
•
MDCARH: MODULATION HIGH CARRIER CONTROL REGISTER
SS
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
MDCHSYNC
R/W-x/u
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
R/W-x/u
(1)
R/W-x/u
MDCH<3:0>
 2010 Microchip Technology Inc.
(1)
R/W-x/u
R/W-x/u
bit 0