TFA9881_1104 PHILIPS [NXP Semiconductors], TFA9881_1104 Datasheet - Page 27

no-image

TFA9881_1104

Manufacturer Part Number
TFA9881_1104
Description
3.4 W PDM input class-D audio amplifier
Manufacturer
PHILIPS [NXP Semiconductors]
Datasheet
NXP Semiconductors
TFA9881
Product data sheet
15.3.1 Stand off
15.3.2 Quality of solder joint
15.3.3 Rework
For further information on temperature profiles, refer to application note AN10365
“Surface mount reflow soldering description”.
The stand off between the substrate and the chip is determined by:
The higher the stand off, the better the stresses are released due to TEC (Thermal
Expansion Coefficient) differences between substrate and chip.
A flip-chip joint is considered to be a good joint when the entire solder land has been
wetted by the solder from the bump. The surface of the joint should be smooth and the
shape symmetrical. The soldered joints on a chip should be uniform. Voids in the bumps
after reflow can occur during the reflow process in bumps with high ratio of bump diameter
to bump height, i.e. low bumps with large diameter. No failures have been found to be
related to these voids. Solder joint inspection after reflow can be done with X-ray to
monitor defects such as bridging, open circuits and voids.
In general, rework is not recommended. By rework we mean the process of removing the
chip from the substrate and replacing it with a new chip. If a chip is removed from the
substrate, most solder balls of the chip will be damaged. In that case it is recommended
not to re-use the chip again.
Fig 21. Temperature profiles for large and small components
The amount of printed solder on the substrate
The size of the solder land on the substrate
The bump height on the chip
temperature
MSL: Moisture Sensitivity Level
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 1 April 2011
= minimum soldering temperature
maximum peak temperature
minimum peak temperature
= MSL limit, damage level
3.4 W PDM input class-D audio amplifier
temperature
peak
TFA9881
© NXP B.V. 2011. All rights reserved.
001aac844
time
27 of 32

Related parts for TFA9881_1104