wm8941 Wolfson Microelectronics plc, wm8941 Datasheet - Page 42

• Manufacturer Part Number: wm8941
• Description: Mono Codec With Speaker Driver And Video Buffer
• Manufacturer: Wolfson Microelectronics plc

WM8941
w
OUTPUT SIGNAL PATH
Figure 19 DAC Digital Filter Path
DIGITAL HI-FI DAC VOLUME CONTROL
Table 29 DAC Volume
The WM8941 output signal paths consist of digital application filters, up-sampling filters, a Hi-Fi DAC,
analogue mixers, speaker and mono output drivers. The digital filters and DAC are enabled by bit
DACEN. The mixers and output drivers can be separately enabled by individual control bits (see
Analogue Outputs). Thus it is possible to utilise the analogue mixing and amplification provided by
the WM8941, irrespective of whether the DACs are running or not.
The WM8941 DAC receives digital input data on the DACDAT pin. The digital filter block processes
the data to provide the following functions:
•
•
•
The high performance sigma-delta audio DAC converts the digital data into an analogue signal.
The analogue output from the DAC can then be mixed with the AUX analogue input and the ADC
analogue input. The mix is fed to the output drivers, SPKOUTP/N, and MONOOUT.
MONOOUT: can drive a 16Ω or 32Ω headphone or line output or can be a buffered version of VMID
(When MONOMUTE=1).
SPKOUTP/N: can drive a 16Ω or 32Ω stereo headphone or stereo line output, or an 8Ω BTL mono
speaker.
The signal volume from each Hi-Fi DAC can be controlled digitally. The gain and attenuation range is
–127dB to 0dB in 0.5dB steps. The level of attenuation for an eight-bit code X is given by:
0.5 × (X-255) dB for 1 ≤ X ≤ 255; MUTE for X = 0
R11
DAC Digital
Volume
REGISTER
ADDRESS
Digital volume control
A digital peak limiter.
Sigma-Delta Modulation
7:0
BIT
DACVOL
[7:0]
LABEL
11111111
( 0dB )
DEFAULT
DAC Digital Volume Control
0000 0000 = Digital Mute
0000 0001 = -127dB
0000 0010 = -126.5dB
... 0.5dB steps up to
1111 1111 = 0dB
DESCRIPTION
PD, Rev 4.0, August 2008
Production Data
42