isd-t360sb ETC-unknow, isd-t360sb Datasheet - Page 83

• Manufacturer Part Number: isd-t360sb
• Manufacturer: ETC-unknow

2—SOFTWARE
SETD
Sets the system time and day as specified by the 2-bytes time_and_day parameter. The time_and_day
parameter is encoded as follows:
Bits 0–2
Day of the week (1 through 7).
Bits 3–7
Hour of the day (0 through 23).
Bits 8–13
Minute of the hour (0 through 59).
Bits 14–15
Must be set to 1.
If time_and_day value is not valid, ERR_PARAM is set in the error word.
Example
SF
Skips forward in the current message time_length units, in 0.2 second segments, and causes message
playback to pause. The RES command must be issued to continue playback. time_length is a 2-byte pa-
rameter that can have any value up to 320 (64 seconds). The skip accuracy is five percent. This com-
mand is meaningful only in the PLAY state.
If the end of the message is detected during execution of SF, execution of the command terminates,
the EV_NORMAL_END bit in the status word sets, the MWRQST signal activates, and the processor switches
to the IDLE state.
If time_length is greater than 320, ERR_PARAM is set in the error word.
Playback speed does not affect the behavior of this command.
Example
ISD
SETD DE09
Byte sequence:
Description:
SF 0019
Byte sequence:
Description:
Microcontroller
VoiceDSP
Set time and day to Monday 1.30
Microcontroller
VoiceDSP
Skip forward five seconds from the current position in the message being played.
Skip Forward time_length
Set Time and Day time_and_day
A
.
M
. (where Monday is the first day of the week)
22
22
0F
0F
DE
DE
00
00
ISD-T360SB
09
09
19
19
2-47