L64777 LSI Logic Corporation, L64777 Datasheet - Page 31

• Manufacturer Part Number: L64777
• Description: DVB Qam Modulator
• Manufacturer: LSI Logic Corporation

2.6 Sync/EF Reinsertion Unit
The hexidecimal address sequence of the read (underlined) and write
pointers is:
00, 01, 03, 02, 06, 07, 05, 04, 0C, 0D, 0F, 0E, 0A, 0B, 09, 08,
18, 19, 1B, 1A, 1E, 1F, 1D, 1C, 14, 15, 17, 16, 12, 13, 11, 10,
30, 31, 33, 32, 36, 37, 35, 34, 3C, 3D, 3F, 3E, 3A, 3B, 39, 38,
28, 29, 2B, 2A, 2E, 2F, 2D, 2C, 24, 25, 27, 26, 22, 23, 21, 20,
60, 61, 63, 62, 66, 67, 65, 64, 6C, 6D, 6F, 6E, 6A, 6B, 69, 68,
78, 79, 7B, 7A, 7E, 7F, 7D, 7C, 74, 75, 77, 76, 72, 73, 71, 70,
50, 51, 53, 52, 56, 57, 55, 54, 5C, 5D, 5F, 5E, 5A, 5B, 59, 58,
48, 49, 4B, 4A, 4E, 4F, 4D, 4C, 44, 45, 47, 46, 42, 43, 41, 40.
The L64777 download through the microprocessor interface starts with
the beginning read pointer value. The write pointer start value is always
fixed to zero. Every time the L64777 accesses the FIFO delay value in
the microprocessor interface (FDEL, see Section 4.1.3, “Register 2,”
page 4-5), the pointers are reset to the these values. If the L64777 is
programmed to the FIFO Autoreset mode (see Section 4.1.7,
“Register 6,” page 4-7), it forces the pointers to the value in the FDEL
register on the read side and to zero on the write side after every FIFO
collision.
The following subsections describe the Sync/EF modes, error flag
insertion, and scrambler.
Sync/EF Reinsertion Unit
Attention:
The only legal load values for the read pointer are Gray
Code numbers with even parity, which means an even
number of 1s (underlined in the above table). Therefore, the
FIFO delay increment can only be in steps of two. The
device achieves maximum delay with a value of 0x41; the
optimum (center) distance to overrun and underruns is
0x60.
2-17