P6002ZC Teccor Electronics, Inc., P6002ZC Datasheet - Page 95

• Manufacturer Part Number: P6002ZC
• Description: 275 V, four-port longitudinal two-chip protector
• Manufacturer: Teccor Electronics, Inc.

High Speed Transmission Equipment
Figure 3.7 ADSL Overview
© 2002 Teccor Electronics
SIDACtor
®
Digital
Network
PSTN
Central Office Site
Data Book and Design Guide
High speed transmission equipment encompasses a broad range of transmission protocols
such as T1/E1, xDSL, and ISDN. Transmission equipment is located at the central office,
customer premises, and remote locations.
Protection Requirements
Transmission equipment should be protected against overvoltages that can exceed 2500 V
and surge currents up to 500 A. In Figure 3.7 through Figure 3.17, SIDACtor devices were
chosen because their associated peak pulse current (I
lightning immunity tests of GR 1089 without the additional use of series line impedance.
Likewise, the fuse shown in Figure 3.7 through Figure 3.17 was chosen because the
amps
low enough to pass GR 1089 current limiting protector test and power cross conditions
(both first and second levels).
The following regulatory requirements apply:
• TIA-968 (formerly known as FCC Part 68)
• GR 1089-CORE
• ITU-T K.20/K.21
• UL 60950
Most transmission equipment sold in the US must adhere to GR 1089. For Europe and
other regions, ITU-T K.20/K.21 is typically the recognized standard.
ADSL Circuit Protection
Asymmetric Digital Subscriber Lines (ADSLs) employ transmission rates up to 6.144 Mbps
from the Central Office Terminal (COT) to the Remote Terminal (RT) and up to 640 kbps
from the RT to the COT at distances up to 12,000 feet. (Figure 3.7)
2
time (I
ADSL transceiver unit
2
t) rating is sufficient to withstand the lightning immunity tests of GR 1089, but
ATU-C
Splitter
3 - 7
Local Loop
up to 12 kft
PP
) rating is sufficient to withstand the
High Speed Transmission Equipment
ADSL
transceiver
unit
ATU-R
Remote Site
http://www.teccor.com
[phone]
POTS
video
voice
data