P6002ZC Teccor Electronics, Inc., P6002ZC Datasheet - Page 114

• Manufacturer Part Number: P6002ZC
• Description: 275 V, four-port longitudinal two-chip protector
• Manufacturer: Teccor Electronics, Inc.

CATV Equipment
CATV Equipment
http://www.teccor.com
[phone]
As cable providers enter the local exchange market, protection of CATV (Community
Antenna TV) equipment becomes even more critical in order to ensure reliable operation of
equipment and uninterrupted service.
Protection Requirements
CATV line equipment should be able to withstand overvoltages that exceed 6000 V and
surge currents up to 5000 A. CATV station protectors should be able to withstand
overvoltages that exceed 5000 V and surge currents up to 1000 A. The SIDACtor devices
illustrated in Figure 3.32 through Figure 3.35 meet these requirements.
The following regulatory requirements may apply:
• UL 497C
• SCTE IPS-SP-204
• SCTE Practices
• NEC Article 830
Power Inserter and Line Amplifier Reference Circuit
Figure 3.32 and Figure 3.33 show how the P1900ME SIDACtor device is used to protect
line amplifiers and power supplies versus using two SCRs and one SIDACtor device
(Figure 3.34). The P1900ME is used because the peak off-state voltage (V
above the peak voltage of the CATV power supply (90 V
rating (I
Figure 3.32 CATV Amplifier Diagram
PP
) is 3000 A.
P1900ME
90 V
AC
3 - 26
Supply
Power
SIDACtor
RMS
Ö2), and the peak pulse current
Amplifiers
®
CATV
Data Book and Design Guide
© 2002 Teccor Electronics
DRM
) is well