IR3897MTRPBF International Rectifier, IR3897MTRPBF Datasheet - Page 41

• Manufacturer Part Number: IR3897MTRPBF
• Description: 4A Highly Integrated Single-Input Voltage, Synchronous Buck Regulator in a PQFN package.
• Manufacturer: International Rectifier

Specifications of IR3897MTRPBF

• Part Status: Active and Preferred
• Package: PQFN / 4 x 5
• Circuit: Single Output
• Iout (a): 4
• Switch Freq (khz): 0 - 1500
• Input Range (v): 1.0 - 16
• Output Range (v): 0.5 - 12
• Pbf: PbF Option Available

STENCIL DESIGN
* Contact International Rectifier to receive an electronic PCB Library file in your preferred format
 Stencils for PQFN can be used with thicknesses
of 0.100‐0.250mm (0.004‐0.010"). Stencils thinner
than 0.100mm are unsuitable because they
deposit insufficient solder paste to make good
solder joints with the ground pad; high reductions
sometimes create similar problems. Stencils in
the range of 0.125mm‐0.200mm (0.005‐0.008"),
with suitable reductions, give the best results.
41
FEBRUARY 02, 2012 |DATA SHEET | Rev 3.2
Figure 49: Stencil Pad Spacing (all dimensions in mm)
Single‐Input Voltage, Synchronous Buck Regulator
- 41 -
4A Highly Integrated SupIRBuck
 Evaluations have shown that the best overall
performance is achieved using the stencil design
shown in following figure. This design is for
a stencil thickness of 0.127mm (0.005").
The reduction should be adjusted for stencils
of other thicknesses.
TM
IR3897
PD‐97663