TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 385

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

RA003
Table 22-14 Flash Memory Status Output Commands
BOOT
22.8.7
ROM
Note 1: "xxH × 3" means that the device goes into an idle state after transmitting 3 bytes of xxH.
Note 2: For detailed information on the status code 1, refer to "22.8.7.1 Flash memory status code".
1st byte
2nd byte
3rd byte
4th byte
5th byte
6th byte
7th byte
8th byte
9th byte
10th byte
11th byte
12th byte
13th byte
14th byte
Transfer byte
Table 22-14 shows the flash memory status output commands.
Flash memory status output command (0xC3)
Matching data 1 (0x86 or 0x30)
-
Matching data 2 (0x79 or 0xCF)
-
Operation command data (0xC3)
-
(Wait for the next operation command data)
Transfer data from the external controller to
TMP89FS60
Page 369
Automatic adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate after adjustment
Baud rate
Transfer data from TMP89FS60 to the external
-(Automatic baud rate adjustment)
OK: Echo back data (0x86 or 0x30)
Error: No data transmitted
-
OK: Echo back data (0x79 or 0xCF)
Error: No data transmitted
-
OK: Echo back data (0xC3)
Error: 0xA1 × 3, 0xA3 × 3, 0x63 × 3 (note 1)
0x3A
0x04
0x00 to 0x7F
0x00
0x00
0x00
Checksum
(complement of 2 of the sum total from 9th
through 12th bytes)
-
Start mark
Byte count
(from 9th through 12th bytes)
Status code 1
Reserved
Reserved
Reserved
controller
TMP89FS60