M55800A Atmel Corporation, M55800A Datasheet - Page 26

• Manufacturer Part Number: M55800A
• Manufacturer: Atmel Corporation

Specifications of M55800A

• Flash (kbytes): 0 Kbytes
• Pin Count: 176
• Max. Operating Frequency: 33 MHz
• Cpu: ARM7TDMI
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 58
• Ext Interrupts: 58
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Uart: 3
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 72
• Resistive Touch Screen: No
• Dac Channels: 1
• Dac Resolution (bits): 10
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 8
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.3/5.0
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

Introduction
1.1.3
1.1.4
1-4
Memory interface
EmbeddedICE Logic
The ARM7TDMI processor memory interface has been designed to allow performance
potential to be realized, while minimizing the use of memory. Speed-critical control
signals are pipelined to allow system control functions to be implemented in standard
low-power logic. These control signals facilitate the exploitation of the fast-burst access
modes supported by many on-chip and off-chip memory technologies.
The ARM7TDMI core has four basic types of memory cycle:
•
•
•
•
EmbeddedICE Logic is the additional hardware provided by debuggable ARM
processors to aid debugging. It allows software tools to debug code running on a target
processor. The EmbeddedICE Logic is controlled through the Joint Test Action Group
(JTAG) test access port, using the EmbeddedICE interface. See Chapter 5 Debug
Interface and Appendix B Debug in Depth for more information.
idle cycle
nonsequential cycle
sequential cycle
coprocessor register transfer cycle.
Copyright © 1994-2001. All rights reserved.
ARM DDI 0029G