ATtiny261 Atmel Corporation, ATtiny261 Datasheet - Page 64

• Manufacturer Part Number: ATtiny261
• Manufacturer: Atmel Corporation

Specifications of ATtiny261

• Flash (kbytes): 2 Kbytes
• Pin Count: 20
• Max. Operating Frequency: 20 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 4
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 16
• Ext Interrupts: 16
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 11
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 0.12
• Eeprom (bytes): 128
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8 to 5.5
• Operating Voltage (vcc): 1.8 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 6
• Input Capture Channels: 1
• Pwm Channels: 6
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

64
ATtiny261/461/861
• Port A, Bit 5 – ADC4/AIN2/PCINT5
• Port A, Bit 4 – ADC3/ICP0/PCINT4
• Port A, Bit 3 – AREF/PCINT3
• Port A, Bit 2 – ADC2/INT1/USCK/SCL/PCINT2
• Port A, Bit 1 – ADC1/DO/PCINT1
• Port A, Bit 0 – ADC0/DI/SDA/PCINT0
• ADC4: Analog to Digital Converter, Channel 4.
• AIN2: Analog Comparator Input. Configure the port pin as input with the internal pull-up
• PCINT5: Pin Change Interrupt source 5.
• ADC3: Analog to Digital Converter, Channel 3.
• ICP0: Timer/Counter0 Input Capture Pin.
• PCINT4: Pin Change Interrupt source 4.
• AREF: External analog reference for ADC. Pullup and output driver are disabled on PA3
• PCINT3: Pin Change Interrupt source 3.
• ADC2: Analog to Digital Converter, Channel 2.
• INT1: The PA2 pin can serve as an External Interrupt source 1.
• USCK: Three-wire mode Universal Serial Interface Clock.
• SCL: Two-wire mode Serial Clock for USI Two-wire mode.
• PCINT2: Pin Change Interrupt source 2.
• ADC1: Analog to Digital Converter, Channel 1.
• DO: Three-wire mode Universal Serial Interface Data output. Three-wire mode Data output
• PCINT1: Pin Change Interrupt source 1.
• ADC0: Analog to Digital Converter, Channel 0.
• DI: Data Input in USI Three-wire mode. USI Three-wire mode does not override normal port
• SDA: Two-wire mode Serial Interface Data.
• PCINT0: Pin Change Interrupt source 0.
switched off to avoid the digital port function from interfering with the function of the Analog
Comparator.
when the pin is used as an external reference or internal voltage reference with external
capacitor at the AREF pin.
overrides PORTA1 value and it is driven to the port when data direction bit DDA1 is set.
PORTA1 still enables the pull-up, if the direction is input and PORTA1 is set.
functions, so pin must be configure as an input for DI function.
2588E–AVR–08/10