DS21Q50L+ Maxim Integrated Products, DS21Q50L+ Datasheet - Page 7

• Manufacturer Part Number: DS21Q50L+
• Description: IC TXRX E1 QUAD 100-LQFP
• Manufacturer: Maxim Integrated Products

Specifications of DS21Q50L+

• Function: Transceiver
• Interface: E1
• Number Of Circuits: 4
• Voltage - Supply: 3.14 V ~ 3.47 V
• Current - Supply: 230mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: *
• Includes: AIS Alarms Detector and Generator, Loopback Functions, PRBS Generator / Detector, Remote Detector and Generator
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -

Note: This data sheet assumes a particular nomenclature of the E1 operating environment. In each 125µs
frame, there are 32 8-bit time slots numbered 0 to 31. Time slot 0 is transmitted first and received first.
These 32 time slots are also referred to as channels with a numbering scheme of 1 to 32. Time slot 0 is
identical to channel 1; time slot 1 is identical to channel 2; and so on. Each time slot (or channel) is made
up of eight bits that are numbered 1 to 8. Bit number 1, MSB, is transmitted first. Bit number 8, the LSB,
is transmitted last. The term “locked” is used to refer to two clock signals that are phase-locked or
frequency-locked or derived from a common clock (i.e., a 8.192MHz clock can be locked to a 2.048MHz
clock if they share the same 8kHz component). Throughout this data sheet, the following abbreviations
are used:
NAME
TCLK
RCLK
CRC4
E-Bit
LOC
CAS
CCS
FAS
MF
Sa
Si
Frame Alignment Signal
Channel Associated Signaling
Multiframe
International bits
Cyclical Redundancy Check
Common Channel Signaling
Additional bits
CRC4 Error Bits
Loss of Clock
This generally refers to the transmit rate clock and can reference an actual input
signal to the device (TCLK) or an internally derived signal used for transmission.
This generally refers to the recovered network clock and can be a reference to an
actual output signal from the device or an internal signal.
7 of 87
FUNCTION